March 11, 2009
For my workbench project I needed to cut sheet goods on the length, and I wanted the cuts to be straight since I’m going to be looking at ‘em for awhile. I found Swanson’s CG100 cutting guide at Lowe’s for $20 and figured it was worth a shot. When I got it home I found that...
Toolmonger: The Week In Tools
[ Feed -
Focus -
Exclude ]
by
Paul Lapczynski
at 2:03 PM
March 09, 2009
I thought Velcro — or more generically, hook-and-loop fasteners — only came in adhesive-backed styles, but then I ran into these Velcro rolls at work, where we use ‘em for cable management. The hooks are on one side of the roll and the loops are on the other. I may be the last ...
Toolmonger: The Week In Tools
[ Feed -
Focus -
Exclude ]
by
Paul Lapczynski
at 1:33 PM
| 1 Citations
March 06, 2009
These crowfoot wrenches caught my eye as I was walking through the local Sears — at first I thought they were the same old tool in a new package, but a second look showed ‘em to be a new-to-me flare-nut version. Attached to an extension, crowfoot wrenches have often helped me get to ou...
Toolmonger: The Week In Tools
[ Feed -
Focus -
Exclude ]
by
Paul Lapczynski
at 1:53 PM
| 1 Citations
March 05, 2009
If you’re looking for a new idea in fasteners, the UFO Ballistic NailScrew might be the newest show in town — you drive ‘em in with a nail gun, and if you ever want to remove ‘em, you can just unscrew ‘em. Just to let you know: My grandfather had this idea first. ...
Toolmonger: The Week In Tools
[ Feed -
Focus -
Exclude ]
by
Paul Lapczynski
at 1:33 PM
February 26, 2009
If you’re looking for a tool to save your marriage and/or your mind, this may be it. Have you ever been in the situation where you’re trying to line up your hitch with a trailer that’s too small to see in your mirrors?  If you don’t have a person who can back you up, you’...
Toolmonger: The Week In Tools
[ Feed -
Focus -
Exclude ]
by
Paul Lapczynski
at 2:02 PM
February 23, 2009
Craftsman’s ratcheting bit wrench’ll help you get into a tight squeeze without losing your knuckles — it’s one of those tools that you’ll regret not having when you need it. The last time I used mine was for a job that required me to remove screws under the dash, a ...
Toolmonger: The Week In Tools
[ Feed -
Focus -
Exclude ]
by
Paul Lapczynski
at 11:46 AM
February 17, 2009
The Kreg Jig Master System is the “fully loadedâ€� version of the Kreg Joinery System, which helps you screw together butt joints. You drill and countersink your screw holes using the jig — then hold the pieces together with the clamping system as you join them with the screws. The Kreg Jig ...
Toolmonger: The Week In Tools
[ Feed -
Focus -
Exclude ]
by
Paul Lapczynski
at 2:15 PM
February 09, 2009
Tired of collecting old wax sticks to repair furniture scratches? FastCap’s SoftWax kit contains twenty wax colors, as well as a furniture-safe WaxWedge and a buffing pad, all in a hard case. You can apply the waxes straight-up or mix ‘em to get the perfect color. The SoftWax kit sta...
Toolmonger: The Week In Tools
[ Feed -
Focus -
Exclude ]
by
Paul Lapczynski
at 1:31 PM
February 05, 2009
I first saw these gloves during the NASCAR pit crew races a few weeks ago. A newscaster was interviewing one of the tire-changers who was wearing these gloves that looked like they could win a fight with a meat grinder. Even if they never face that challenge, the gloves certainly gave the pit cr...
Toolmonger: The Week In Tools
[ Feed -
Focus -
Exclude ]
by
Paul Lapczynski
at 12:48 PM
Makita’s compact driver set includes a two-speed drill driver, an impact driver, two lithium-ion batteries, and a 50-minute charger, all packed in a hard case. The impact driver can deliver 800 inch-pounds of torque at up to 3,000 impacts per minute, and the two-speed drill driver spins up to 35...
Toolmonger: The Week In Tools
[ Feed -
Focus -
Exclude ]
by
Paul Lapczynski
at 11:09 AM




